Aquaforte DM-Vario S DM-30000
Aquaforte DM-Vario S DM-30000
In stock. expected to be delivered by 02.04.2024
Description / Aquaforte DM-Vario S DM-30000
The DM-Vario S pumps are energy-efficient devices with innovative technology. They are designed for outdoor use and can be installed both wet and dry. The pump can be set in 22 stages via an external controller. Regulation via the controller is possible for the flow and thus also for the power consumption from 30% up to 100% output. The pump can be started up using an on / off switch on the controller. The pump transports dirt particles up to 6 mm. The DM Vario combines all the advantages of the DM series.
Blocking and dry running protection of the DM Vario S pond pump
If there is no more water in the rotor, the DM-Vario S switches off automatically. The pump switches off in the event of a blockage due to a lock position. This position prevents the motor from burning out and further energy consumption. If the rotor is blocked due to heavy contamination, the pump also switches off. The pump remains in this lock until the blockage is released.
Since the DM-Vario is not self-priming, it must be set up below the water level. The DM series pond pumps are very suitable for connection to pond filters, for waterfalls, fountains and streams. The pumps are not suitable for a swimming pool.
More Information
Pump type | Submersible pond pumps , Dry installation pumps |
---|---|
Flow rate l / h | 30000 |
Adjustable flow rate | Yes |
Delivery height | 9.5 |
Power consumption in watts | 45-385 W |
Voltage | 220-240V |
Warranty in years | 2 |
Connection pressure side | 50mm / 2" |
Connection suction side | 50mm / 2" |
Max. dirt particle size in mm | 6 |