Aqua Forte professional pond heater stainless steel 3kW
Inexpensive pond heater in a stainless steel housing with 3.000 watts of power.
The pond heater switches off automatically when the set temperature is reached. In addition, the heater has overheating protection.
This model is equipped with an adjustable thermostat (0-40 ° C). The heating element and the temperature sensor are made of stainless steel and therefore rust-free, the connections are made of plastic. The model can be connected via a hose or a PVC pipe. A 5m cable with plug is included.
Connection options: 63 and 50 mm / 2 1/2 "PVC pipe or 25/32/40 mm hose.
maximum pond size approx. 30,000 liters
Important! 3 KW heaters need a socket with 400 volt supply!
Do not throw the device into the water, but place it outside of the pond, protected against splashing water. If no water flows through the device (e.g. when cleaning the filter), always pull out the power plug. If the device is operated without water, the damage incurred is not covered by the guarantee. We therefore recommend installing the connections at the top so that a residual amount of water always remains in the device.
Please also note the following: In order to heat a pond effectively, you need a pond cover, otherwise the heat is immediately released back into the outside air. We recommend our PE balls for this. If you keep it inside, please remember that condensation can occur.
|Warranty in years||2|