Oase UVC Eco 60W 4-Pin Replacement Lamp for Bitron Eco & Premium
- SKU:
- 403.074
In stock. expected to be delivered by 20.11.2026
Fast and reliable delivery
Every order is packed carefully and shipped quickly. You can see the expected delivery date above.
Questions? Ask our experts
We are happy to help you choose the right products. Contact us
Oase UVC Eco 60W 4-Pin Replacement Lamp for Bitron Eco & Premium
Genuine OASE UVC Eco 60 W lamp for Bitron Eco and Bitron Premium
The OASE UVC Eco 60 W replacement lamp is the original lamp for the UVC clarifiers of the Bitron Eco and Bitron Premium series. OASE developed it in cooperation with Philips and matched it to the electronic ballasts of these units. With a service life of up to 12'000 operating hours it lasts considerably longer than conventional UVC lamps, which noticeably reduces maintenance effort and running costs at the koi pond.
Fits these OASE UVC units
The Bitron Eco and Bitron Premium units are fitted with one or more 60 W lamps. For a complete lamp change you therefore need the following number, depending on the model:
- OASE Bitron Eco 120 W: 2 lamps
- OASE Bitron Eco 180 W: 3 lamps
- OASE Bitron Eco 240 W: 4 lamps
- OASE Bitron Premium 60 W: 1 lamp
- OASE Bitron Premium 120 W: 2 lamps
- OASE Bitron Premium 180 W: 3 lamps
On units with several lamps we recommend replacing all lamps at the same time so that the UVC output in the reactor remains even. You will find the matching units in our shop under OASE Bitron Premium UVC.
Why regular lamp replacement matters
A UVC lamp still glows visibly after many operating hours, but the UV-C radiation that actually controls algae declines over time. The result: suspended algae are no longer killed reliably, the pond water turns cloudy and the germ load rises. 12'000 operating hours correspond to roughly 16 months of continuous operation. If your UVC unit runs all year round, the ideal time to replace the lamp is spring, before the algae season starts, so that full UVC output is available during the summer months.
Tips for changing the lamp
Disconnect the UVC unit completely from the mains before changing the lamp. Do not touch the glass of the new lamp with bare fingers, as skin oil shortens its life: use a clean cloth or gloves. Take the opportunity to check the quartz sleeve for limescale and damage, because a dirty quartz sleeve greatly reduces the effect even of a new lamp. Caution: the lamp emits UV-C radiation and may only be operated inside the closed unit. It is not suitable for general lighting.
Your benefits at a glance
- Genuine OASE replacement lamp, a perfect fit for Bitron Eco and Bitron Premium
- Service life of up to 12'000 operating hours, so fewer lamp changes
- Developed in cooperation with Philips
- 4-pin PL-L type base for a simple replacement
- Full UVC output against suspended algae for clear pond water
- Stocked in Switzerland: fast delivery without customs formalities
Technical data
- Manufacturer: OASE
- Manufacturer part number: 57077
- Power: 60 W
- Base: 4-pin (PL-L type)
- Lamp length: approx. 53 cm
- Service life: up to 12'000 operating hours
- Fits: OASE Bitron Eco 120/180/240, OASE Bitron Premium 60/120/180
No questions yet. Ask the first question about this product.
Ask a question about this product