4 l Nitrate Resin for Koi Ponds
- SKU:
- 500.514
In stock. expected to be delivered by 19.11.2026
Fast and reliable delivery
Every order is packed carefully and shipped quickly. You can see the expected delivery date above.
Questions? Ask our experts
We are happy to help you choose the right products. Contact us
4 l Nitrate Resin for Koi Ponds
Nitrate resin for targeted nitrate removal
Elevated nitrate levels are particularly common in heavily stocked koi ponds. Feeding, fish waste and the decomposition of organic matter continuously produce nitrate. At the same time, many koi ponds contain too few aquatic plants to absorb these nutrients naturally.
This high-quality nitrate resin has been developed for the targeted removal of nitrate from pond water. It is a nitrate-selective, strongly basic and macroporous anion-exchange resin. The resin exchanges nitrate ions in the water for chloride ions, thereby reducing the nitrate level without significantly altering the pH value.
Ideal for koi and fish ponds
The nitrate resin is particularly suitable for:
- heavily stocked koi ponds
- ponds with little or no planting
- quarantine and holding tanks
- filter systems with good water flow
- ponds with consistently elevated nitrate levels
By selectively binding nitrate, the resin can help stabilise water quality in ponds with a high biological load.
4 litres – binds up to 120 g of nitrate
One litre of nitrate resin can absorb up to 30 grams of nitrate. The 4 litres in this pack can therefore bind up to 120 grams of nitrate before regeneration is needed. In a 4'000-litre pond, this corresponds mathematically to a reduction in nitrate of up to 30 mg/l.
As a guideline, we recommend approximately 1 litre of nitrate resin per 1'000 litres of pond water, so one pack is suitable for ponds of up to around 4'000 litres. For larger ponds, combine several packs or regenerate the resin more frequently.
The actual service life depends on the nitrate concentration, pond volume, fish stock, feeding levels and the amount of resin used.
Easy to use in the pond filter
The nitrate resin has a fine grain size of approximately 0.4 to 0.6 millimetres. It must therefore be placed in a suitable fine-mesh filter media bag to prevent loss of material.
Position the filled filter bag in an area of the pond filter where the water flows evenly and passes through as much of the resin as possible. Good water circulation improves nitrate removal and allows the filter medium to be used more efficiently.
For particularly accurate monitoring, the nitrate resin can also be installed in a separate bypass. This allows the nitrate level to be measured before and after the resin, making it easier to determine when regeneration is required.
Regenerable and reusable for several years
Once the absorption capacity of the resin has been exhausted, it can be regenerated using a solution of common salt and then reused.
For each litre of nitrate resin, use:
- 200 to 250 grams of common salt
- 2 litres of warm water at approximately 40 °C
- a regeneration period of approximately 10 to 12 hours
For the full 4-litre pack, that means 800 to 1'000 grams of common salt and 8 litres of warm water.
For effective regeneration, the salt solution should be circulated or regularly moved through the resin. After regeneration, rinse the nitrate resin thoroughly with clean water before returning it to the pond filter.
When used and regenerated correctly, the resin can be reused for several years.
No questions yet. Ask the first question about this product.
Ask a question about this product