Oase Quartz Sleeve D44 x 518 mm (13331) for Bitron Premium & Vitronic
- SKU:
- 403.075
In stock. expected to be delivered by 20.11.2026
Fast and reliable delivery
Every order is packed carefully and shipped quickly. You can see the expected delivery date above.
Questions? Ask our experts
We are happy to help you choose the right products. Contact us
Oase Quartz Sleeve D44 x 518 mm (13331) for Bitron Premium & Vitronic
Genuine OASE quartz sleeve for Bitron Premium, Vitronic and FiltoClear
The quartz sleeve is the protective sheath of the UVC lamp: it separates the lamp from the pond water and lets the UV-C radiation pass through almost unhindered. Ordinary glass would absorb most of the UV-C radiation, which is why OASE uses high-purity quartz glass. This genuine spare part with OASE part no. 13331 has a diameter of 44 mm and a length of 518 mm. The flanged rim, the folded-over edge at the end of the tube, holds the sleeve in place in the unit and, together with the O-ring, seals it reliably against the water.
Fits these OASE units
The number of sleeves required depends on the number of UVC lamps in the unit:
- OASE Bitron Premium 60 W: 1 sleeve
- OASE Bitron Premium 120 W: 2 sleeves
- OASE Bitron Premium 180 W: 3 sleeves
- OASE Vitronic 36 W and Vitronic 55 W: 1 sleeve each
- OASE Bitron Gravity 55 W: 1 sleeve
- OASE FiltoClear 20000 and FiltoClear 30000 (also as a set): 1 sleeve each
- OASE BioSmart Set 30000 and 36000: 1 sleeve each
You will find the matching UVC units under OASE Bitron Premium UVC and the matching lamp under OASE UVC Eco 60 W replacement lamp.
When the quartz sleeve needs replacing
During operation, limescale and biofilm build up on the quartz sleeve and greatly reduce UV-C transmission. Even a new UVC lamp then has hardly any effect against suspended algae. Check the sleeve at every lamp change. Light deposits can be removed with diluted vinegar or a descaler and a soft cloth. If the glass has turned milky, is scratched, cracked or damaged at the flanged rim, it must be replaced: a damaged sealing edge lets water into the lamp compartment and can destroy the unit's electronics.
Installation tips
Disconnect the unit completely from the mains and depressurise the water circuit. After removing the UVC lamp, the old quartz sleeve can be taken out. Check the O-ring at the same time and replace it if it is brittle or deformed. Insert the new sleeve without force, handle it with a clean cloth where possible and check for leaks after reassembly before switching the UVC system back on.
Your benefits at a glance
- Genuine OASE spare part no. 13331, a perfect fit for Bitron Premium, Vitronic, Bitron Gravity, FiltoClear and BioSmart Set
- High-purity quartz glass with maximum UV-C transmission
- Flanged rim for a secure fit and reliable sealing
- Restores the full performance of the UVC system against suspended algae
- Stocked in Switzerland: fast delivery without customs formalities
Technical data
- Manufacturer: OASE
- Manufacturer part number: 13331
- Material: quartz glass
- Diameter: 44 mm
- Length: 518 mm
- Version: with flanged rim
- Fits: Bitron Premium 60/120/180 W, Vitronic 36 W, Vitronic 55 W, Bitron Gravity 55 W, FiltoClear 20000/30000, BioSmart Set 30000/36000
No questions yet. Ask the first question about this product.
Ask a question about this product